Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations Toost on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Optistruct - Performing Contact with linear static analysis

Status
Not open for further replies.
MDHI

MDHI

Automotive
Nov 10, 2021
1
Hello,
How can I perform linear contact in linear static analysis using OptiStruct. I know it is possible to do that with Patran/Nastran but with Optistruct I am not sure.
 
Status
Not open for further replies.

Similar threads

mohamed hassan 2014
  • Locked
  • Question
Nonlinear analysis using HyperMesh with OptiStruct
Replies
0
Views
493
mohamed hassan 2014
mohamed hassan 2014
Stress_Eng
  • Question
FEM Contact Analysis Variables
Replies
17
Views
11K
Stress_Eng
Stress_Eng
NASAJPL
  • Locked
  • Question
(Linear) Contact Force, but No Contact Pressure
Replies
2
Views
770
BlasMolero
BlasMolero
Zande10
  • Locked
  • Question
Linear Static vs Linear Dynamic FEA for a moving mass having deceleration
Replies
5
Views
352
FEA way
FEA way
D
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw

Part and Inventory Search

Sponsor

Back
Top Bottom