oring model

[PAULBLAIR]

I have a need for an oring model controlled by design table and multiple congfigurations. (Different sizes in the AS spec) The oring needs to be manipulated to show compression in the axial and radial directions. This is the kind of thing you know someone else has done before. Please share or point me in the correct direction.

 

[ctopher]

I have done this before by simply adding more configurations.

Chris
SolidWorks/PDMWorks 08 3.1
AutoCAD 06/08
ctopher's home (updated Jul 13, 2008)

 

[macduff]

I started something like this at one time. Let me see if I have some SW part models laying around

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2008 SP 3.1
Dell 490 XP Pro SP 2
Xeon CPU 3.00 GHz 3.00 GB of RAM
nVida Quadro FX 3450 512 MB
I'm just a little verklempt. Talk amongst yourselves. I'll give you a topic. Pink Floyd, was neither Pink nor Floyd. Discuss!--“Coffee Talk” Mike Myers SNL

 

[fcsuper]

SolidPartners did this a long time ago as part of their product that competed with Toolbox before SW bought Toolbox. It's still available:

http://www.solidpartners.com

Matt Lorono
CAD Engineer/ECN Analyst
Silicon Valley, CA
Lorono's SolidWorks Resources
Co-moderator of Solidworks Yahoo! Group
and Mechnical.Engineering Yahoo! Group