edwardone123
Bioengineer
Can you please outline for me behavior(flow rates /pressure/ of fluid in oscillating converging flow in y connector with possible parallel tubes
Thnx
Thnx
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
oscillating converging flow in Y connector
- Thread starter edwardone123
- Start date
- Status
As with your other question, the mass flow parameters and also the fluid viscosity and density all play a part in the flow characteristics.
If you need to know for sure, or if you need to mix fluid then CFD will be required. If you just need to know the delta P, then just make an allowance.
Adrian
If you need to know for sure, or if you need to mix fluid then CFD will be required. If you just need to know the delta P, then just make an allowance.
Adrian
- Status
Similar threads
- Locked
- Question
- Locked
- Question