Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

OVAKO CROMAX IH 482

Status
Not open for further replies.
kobuss

kobuss

Mechanical
Sep 19, 2012
9
Good morning guys, hope all of you are well. Just thought I post in here to see if anybody has the information i am looking for. I am looking for the maximum allowable thickness of the chrome layer on the CROMAX IH 482 from OVAKO. And also the amount of microcracks per mm^2.

Thanks for the help guys, have a great Friday!!!
 
Replies continue below

Recommended for you

Sort by date Sort by votes
You will need to contact Ovako directly for this information. The Cr thickness will likely be in the range of 20-30 micrometers. Crack density should be in the range of 50-150 cracks/mm.
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top Bottom