Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

P1 equivalence issues

Status
Not open for further replies.

ll23

Industrial
Jan 20, 2016
59
VE
Greetings, I have some doubts about the equivalence of a S-355-J2,

Is S-355-j2 steel plate belong to 1.2 grouping of ISO 15608?

Is A572-Gr50 steel plate equivalent to a S-355-J2?

Based in the table 4.4 a of API 650 2013, is possible to say that all the materials in the group IVA are equivalents?

Based in the equivalence of grouping numbers showed in table QW/QB-422 of ASME IX, which indicates that an A572, A573 and A622 are grouped as P1 and equivalent to ISO 15608 subgroup 1.1, 1.2 and 11.1, it' possible to use a PQR for P1 steel pipe in P1 Plate welding, ?



 
Replies continue below

Recommended for you

Just remember there is no "equivalence" between ISO materials ans ASME IX materials.
If it is not listed in ASME IX then it does not have a P number and is therefore classed as an unassigned material.
Regards,
Shane
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top