Paint Roller Extender Thread 1

[pmbov]

Hi group,
I have been searching the web to find a CAD model for the end of a 3/4" paint roller extender. I mainly need the threads, I don't believe they are a typical 3/4" thread. Can anyone help?

 

[handleman]

It may help to know that the paint roller thread is the same as a daggum broom hantle.

https://www.eng-tips.com/viewthread.cfm?qid=153052

 

[JohnRBaker]

I'd be surprised if there are any CAD models which have been published on the web. Not that no one has ever taken the time to model the threads, just that they've never posted them in a manner where you could easily find it. I'm guessing that you need to model this for something like 3D printing. If that's the case, you may just have to run down to your local Home Deport and buy a cheap example of an extension handle and model the threads yourself.

The above image came from one that costs less than $7 (link below):

https://www.homedepot.com/p/Economy-4-ft-Wood-Extension-Pole-with-Metal-Tip-RP-548-HM/100136206

John R. Baker, P.E. (ret)
EX-Product 'Evangelist'
Irvine, CA
Siemens PLM:
UG/NX Museum:

The secret of life is not finding someone to live with
It's finding someone you can't live without

 

[handleman]

https://www.thingiverse.com/thing:1373146/files

http://joycedayton.com/products/screws-and-nuts/machine-screws-and-nuts/34-5-single-lead-acme

http://www.nookindustries.com/Product/ProductName/101767/Bronze Acme Nut 3/4"-5 RH