Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

painting of coolig tower structures

Status
Not open for further replies.
pdprao

pdprao

Mechanical
Joined
Dec 29, 2002
Messages
33
Location
IN
which is better paint system for cooling tower steel structures. Is it inorganic zinc silicate with two coats of high build epoxy with total DFT of 250 microns OR
polyurethene 100% solids with DFT of say 600 microns.
which is better system out of the above two systems when
applied with SA2 1/2 blast cleanig finish.
 
Status
Not open for further replies.

Similar threads

NGiLuzzu
  • Locked
  • Question Question
Painting procedures & reports generation SOFTWARE TOOL
Replies
2
Views
862
NGiLuzzu
NGiLuzzu
T
  • Locked
  • Question Question
Calculate required amount of paint for mechanical spring
Replies
5
Views
3K
Compositepro
Compositepro
ipi
  • Locked
  • Question Question
Uninsulated portions of insulated piping
Replies
1
Views
935
Andrew ONeill
Andrew ONeill
Bob_3
  • Locked
  • Question Question
Costs of Painting versus Grit blasting
Replies
1
Views
337
BenMacier
BenMacier
Fran67
  • Locked
  • Question Question
Painting for hazard static electricity (IIC)
Replies
1
Views
455
IRstuff
IRstuff

Part and Inventory Search

Sponsor

Back
Top