particle size distribution and thixotropic casting

[permafacture]

I was wondering if anyone could recommend a good text that covers the topic of selecting particle sizes in the engineering of ceramic bodies.

I am studying thixotopic casting of a ceramic slurry and have read extensively that particle size distribution has a profound effect on the drying and final strength of the ceramic body, but I have not found a text that covers the details of that.

The ceramic slurry consists of clay particles, sub 325 mesh fillers, and graded minerals.

thanks!

Elliot

 

[PKerEng]

Check "Ceramic Processing Before Firing" by Onoda & Hench. Also, any good ceramic hobby book may give you a lot of hints "how-to"

Slawomir

http://www.pkerengineering.com