BachelorM7
Mechanical
- Oct 12, 2015
- 1
Hello.
We are working on a bachelor about optimization of an ejector.
A quick overview of the structure:
There are two inlets and an outlet. In one of the inlets water flows, which is delivered by a pump. In the second inlet particles/powder will be sucked up from a bag. The water and the powder is mixed and leaving the ejector through the outlet.
The issues are: how do I add both powder and air at the other inlet?
I use CFX.
Best regards
Anette
Student
Engineering College of Aarhus
Denmark
We are working on a bachelor about optimization of an ejector.
A quick overview of the structure:
There are two inlets and an outlet. In one of the inlets water flows, which is delivered by a pump. In the second inlet particles/powder will be sucked up from a bag. The water and the powder is mixed and leaving the ejector through the outlet.
The issues are: how do I add both powder and air at the other inlet?
I use CFX.
Best regards
Anette
Student
Engineering College of Aarhus
Denmark