Partition cell on a cylinder

[TetT]

Hello,

I try to mesh a cylinder with spherical end ( picture on attached file ).

On the beginning cylinder was orange and I create partitions to change color (yellow/green I can mesh, orenge I can't ).

So I have a problem, I do not manage to find goods partitions, I have a difficulty with a spherical end ( picture ).

Regards,

 

[corus]

You have one plane passing through the cylinder. Make another at 90 degrees to that and use both planes to partiton the cylinder.

Tara

http://tinyurl.com/4ydjg7m

 

[rstupplebeen]

Corus is spot on to create a hex mesh. You can still mesh this with tets even if it is orange.

Rob Stupplebeen

https://sites.google.com/site/robertkstupplebeen/

 

[TetT]

Hello,

Thank you very much for your answers.

T&T