Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

parts list in nx9 1

Status
Not open for further replies.

Mike Brosseau

Mechanical
Joined
Jul 24, 2017
Messages
5
Location
US
When placing a parts list on a drawing, even thought the initial callout is set to 1 and the increment is set to 1, the initial callout is 10 and the increment is 10; I cannot figure out how to correct this. Also, the piece number, or item number, sequence is random (60, 10, 30, 40, 70, etc instead of 1, 2, 3, etc).
 
It will be the way the default parts list is set. Setting in preferences will not fix it. You need to create a new parts list template to use, that is set for your preferences.
Our video shows how to make parts list templates: [URL unfurl="true"]https://vimeo.com/album/3065578/video/106565338[/url]

Anthony Galante
Senior Support Engineer


NX3 to NX11 with almost every MR (24versions)
 
If you are connected to Teamcenter, the numbering may be drawn from there.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top