Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pass Partition Bypass Issues with Steam in Shell & Tube Heat Exchangers

Status
Not open for further replies.
ws1122

ws1122

Chemical
Nov 21, 2016
1
Good afternoon,

I am using HTRI to design a u-tube heat exchanger with steam on the shellside. I am having issues with the B-stream flow fraction being very low for the steam. My question...do we really have to worry about the b stream being too low with steam as the fluid?

Thanks!
 
Status
Not open for further replies.

Similar threads

T
  • Locked
  • Question
Help with dropping cylinder
Replies
6
Views
3K
BEMPE16524
BEMPE16524
gkvengat
  • Question
ASTM B705 EFW Pipes Welded with Filler Metal Addition
Replies
2
Views
3K
mfgenggear
mfgenggear
B
  • Locked
  • Question
Dust Collector Gate Actuator in Hazardous Location
Replies
3
Views
3K
btrueblood
btrueblood
tarekzad
  • Locked
  • Question
Belt Conveyor O&M [operation and maintenance ] Cost index
Replies
1
Views
393
Gr8blu
Gr8blu
CarlosGarza10
  • Locked
  • Question
Is it possible to calculate punts using RPMs in an extruder
Replies
0
Views
458
CarlosGarza10
CarlosGarza10

Part and Inventory Search

Sponsor

Back
Top Bottom