Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

passivated s/stl. parts ,

Status
Not open for further replies.

Guest
Stainless steel parts deteriorated removing approx.
.002 to .003 per surface. worked to mil. specs.
same type of parts etc. done prev. without problems.
Any answers?
 
Status
Not open for further replies.

Similar threads

ShlomoB
  • Locked
  • Question
Protecting passivated CRES after reaming
Replies
1
Views
102
TugboatEng
TugboatEng
OSU Engineer
  • Question
Mystery pitting corrosion on 316 parts
Replies
14
Views
2K
EdStainless
EdStainless
jennin77
  • Locked
  • Question
Cathodic protection of SS316L "internal" parts
Replies
4
Views
115
jennin77
jennin77
EminaTr
  • Locked
  • Question
Corrosion tests on E-coated and powder coated parts
Replies
1
Views
72
lucky-guesser
lucky-guesser
quizzical1
  • Locked
  • Question
Post-working passivated 300 series SS...
Replies
7
Views
147
quizzical1
quizzical1

Part and Inventory Search

Sponsor

Back
Top Bottom