WorldWarrior
Industrial
- Dec 4, 2010
- 1
thread791-51805
killemall asked for this in the thread ref. above.
1) start with the password protected file.
2) save as a *.L5K file
3) using notepad open the *.L5K
4) Near the top of the file you will see the lock password encoded to the right of the header between quotes.
5) Highlight the password and hit the space bar leaving a space between the quotes.
6) save and open with RSLogix5000. The password has been removed and if it is a guardlogix so has the signature.
Warning!!!!!
If you do not have all the Add-ons for modules configured in the hardware layout, the import will fail due to not having an association function of the missing add-on...
Good cracking of the code but does anyone know how to unlock the PLC....thumbsup
killemall asked for this in the thread ref. above.
1) start with the password protected file.
2) save as a *.L5K file
3) using notepad open the *.L5K
4) Near the top of the file you will see the lock password encoded to the right of the header between quotes.
5) Highlight the password and hit the space bar leaving a space between the quotes.
6) save and open with RSLogix5000. The password has been removed and if it is a guardlogix so has the signature.
Warning!!!!!
If you do not have all the Add-ons for modules configured in the hardware layout, the import will fail due to not having an association function of the missing add-on...
Good cracking of the code but does anyone know how to unlock the PLC....thumbsup