Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PDH vs CE Hours (PE and LEED AP)

Status
Not open for further replies.

spieng89

Structural
Jun 30, 2015
172
I'm in my first year where I need to report PDH's to my state board. I am also LEED AP credentialed. My question is can I use PDH hours to also satisfy some of the CE hour requirements from GBCI/USGBC. Has anyone done this? My employer pays for my hours, but if I can double dip hours to save them money I'll try to do that instead. Any info would be helpful
 
Replies continue below

Recommended for you

Typically, the LEED oriented classes will produce a certificate that has GBCI LEED Continuing Education. If the class also give you credit toward your PE requirements, it should be ok.

Although, the LEED content is typically not very technical in nature and fairly easy to complete, I don't know there would be any cross over.
 
Your best bet is to contact your State Board. They have the final call.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor