Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PDMWorks and Revisioning

Status
Not open for further replies.

isis

Computer
Jul 7, 2003
1
I am currently evaluating PDM Works and I'm having a hard time understanding how revisioning works.

Could anyone take a moment to describe revisioning and the extent to which PDMWorks handles revisions?
 
Replies continue below

Recommended for you

You can setup revision and version in PDM about anyway you want.
For an example this is how we do it:
A01-01 thru A99-99 for not controlled by documentation group.
P01-01 thru P99-99 for Prototype control.
R01-01 thru R99-99 for released.
From P01 to P02 takes an ECN and the version –01 to –02 does not take an ECN.
From R01 to R02 takes an ECN and the version –01 to –02 does not take an ECN.
Hope the helps.
The PDM will not let you R02 back to a R01.


Bradley
 
Dear ISIS,

We use the numbering revisioning (1-99)scheme for Development and lettering revisioning (A-Z)scheme for Production.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor