Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Peng Robinson BIPs Estimation Method In Hysys

Status
Not open for further replies.
Said92441322

Said92441322

Chemical
Jun 7, 2016
17
Dear All,
Whenever I am selecting the Peng-Robinson fluid package in Hysys, I find estimated values of Binary Interaction Parameters (BIPs) that are used for the calculation. Anyone have an idea by what method those BIPs are estimated ? is it Group Contribution method? or another method? or they are determined experimentally?
 
Status
Not open for further replies.

Similar threads

AlejandraGuillen
  • Locked
  • Question
Simulación de equipos reales en Aspen Hysys
Replies
0
Views
746
AlejandraGuillen
AlejandraGuillen
Jack Nicholson
  • Locked
  • Question
Entering ppm concentration in ASPEN HYSYS
Replies
0
Views
801
Jack Nicholson
Jack Nicholson
chemiee
  • Locked
  • Question
Aspen Hysys - How to create an equilibrium curve ?
Replies
0
Views
3K
chemiee
chemiee
Riko_93
  • Locked
  • Question
Aspen Hysys V9- Latent heat calculation
Replies
0
Views
703
Riko_93
Riko_93
Jack Nicholson
  • Locked
  • Question
HYSYS VS Aspen
Replies
0
Views
544
Jack Nicholson
Jack Nicholson

Part and Inventory Search

Sponsor

Back
Top Bottom