Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Per pass conversion for second stage in the Hydrocraker unit

Status
Not open for further replies.
Abu najad

Abu najad

Student
Oct 11, 2017
14
How we can calculate per pass conversion in the Hydrocraker unit?
 
Status
Not open for further replies.

Similar threads

Tygra_1983
  • Question
Correct Displacements, but incorrect moments using the DSM for Structure
Replies
7
Views
3K
rb1957
rb1957
Tygra_1983
  • Locked
  • Question
The shooting method for bvp and intepolation to find the value of the initial slope
Replies
4
Views
93
Tygra_1983
Tygra_1983
Duy Binh Pham
  • Locked
  • Question
How prescribed displacement and Floquet Bloch boundary conditions in COMSOL of two-dimensional unit
Replies
0
Views
65
Duy Binh Pham
Duy Binh Pham
Cary Yue
  • Locked
  • Question
How to use AISC Table 3-6? Why the unit is Kips for Uniform Load?
Replies
6
Views
139
BulbTheBuilder
BulbTheBuilder
S
  • Question
the determination of the temperature index of enamelled winding wires
Replies
1
Views
1K
Gr8blu
Gr8blu

Part and Inventory Search

Sponsor

Back
Top Bottom