I was looking into designing a wood structure in accordance with IBC 2009. The structure will have perforated shear walls. IBC 2006 section 2305.3.8.2.4 used to deal with perforated shear walls specifically equations 23-3 and 23-4 however; this section was removed from IBC 2009. Does anyone know where this sections went?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Perforated Shear Walls
- Thread starter SteelPE
- Start date
woodman88
Structural
- Oct 23, 2009
- 1,020
It is in the AF&PA SDPWS (See 2009 IBC section 2306.3)as a free viewable only pdf.
Garth Dreger PE - AZ Phoenix area
As EOR's we should take the responsibility to design our structures to support the components we allow in our design per that industry standards.
Garth Dreger PE - AZ Phoenix area
As EOR's we should take the responsibility to design our structures to support the components we allow in our design per that industry standards.
crozroz0000
Structural
SteelPE,
you may want to download an excel file called 'IBC 2009 & ASCE7-05 edition (Revised 7/26/2011)' from One of the tabs is on perforated shear walls.
you may want to download an excel file called 'IBC 2009 & ASCE7-05 edition (Revised 7/26/2011)' from One of the tabs is on perforated shear walls.
- Status
Similar threads
