Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Permit requirements
- Thread starter Lan123
- Start date
If you are in the metro Chicago area, you will need to work through CMAP.
You will need a building permit in the municipality where the project is located.
You may have to get a permit from the Corp of Engineer if you project is located in a wetland or flood zone. Depending on the location and access to the the facility, you may have to have a permit from IDOT, a county DOT, and maybe a railroad.
You will need a building permit in the municipality where the project is located.
You may have to get a permit from the Corp of Engineer if you project is located in a wetland or flood zone. Depending on the location and access to the the facility, you may have to have a permit from IDOT, a county DOT, and maybe a railroad.
- Status
Similar threads
- Locked
- Question
- Locked
- Question