Pls, somebody knows some standards, official guidelines or manufacturers association documents for PET preforms and/or PET bottles.
Obliged if you will supply me by such information.
Thanks.
Molder
Dear Mr.Caserta,
Thank you for response, so by PET I meant the
Polyethylene Terephthalate resin, applied for
manufacturing of bottles for mineral water and
carbonated soft drinks.
Best regards,
Molder
Thanks for the definiton, In the machinery Directive Annex I, clause 2.1, you'll find requirments for machinery for foods, additionally Directive 89/109/EEC is the Directive for Materials and articles intended to come into contact with Food. I don't know the specific standards but the Directives should point you in the right direction. If you need more help with you machine feel fre to contact me. Christopher Caserta
ccaserta@us.tuv.com
Ph:904-225-0360
Dear Mr.Caserta,
Let me express my gratitude to you for your
advise and your kindly readiness to share your knowledge!
Some day I hope to be useful for you too.
Best regards,