Phantom Images in RealView Mode?

[Solidmold]

A neat challenge for RealView users
Try this:

1. Create a part and construct a plain rectangular extrude.
2. Apply a PP Copolymer material and activate RealView. Other plastics like ABS or POM also work.

You should see a "phantom" image of a warehouse. Well I see it on my laptop, a DELL M70 with a Nvidia Quadro FX Go1400. Don't call me crazy but I dont have that picture on this laptop and it's not a decall or texture.


SolidMold

 

[SBaugh]

Instead of making a Square block make a Sphere. This has been like this since Realview was released, except in the beginning it used to be an acceptable Neighborhood.

Regards,

Scott Baugh, CSWP

http://www.scottjbaugh.com

faq731-376

 

[ctopher]

This has always been there and the picture varies among different licenses. Ours is some type of refinery.
I have asked SolidWorks how can I change it and was told I can't. I'll find a way someday.

Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP3.1 / PDMWorks 05
ctopher's home site (updated 06-21-05)
FAQ559-1100
FAQ559-716

 

[Solidmold]

I recognize this shouldn't be a issue to waste more time, but I've looking further an with other materials, like Acrylic... the phantom image is a Daytona Car??

Come on...If the idea is to get marketing/design advantage so let us change this image.

Solidmold