Mar 19, 2003 #1 ken2 Mechanical Jan 10, 2003 6 Proe 2001 photorender was working an now is not. Did not change any configs, verified that all were ok and still, click the teapot and no action. What gives?
Proe 2001 photorender was working an now is not. Did not change any configs, verified that all were ok and still, click the teapot and no action. What gives?
May 13, 2003 #2 procadman2 Mechanical May 9, 2003 38 Is the teapot grayed out? procadman2 Proe Design & Admin Mechanical & Aerospace "You can't build a reputation on something you haven't done." H Ford Upvote 0 Downvote
Is the teapot grayed out? procadman2 Proe Design & Admin Mechanical & Aerospace "You can't build a reputation on something you haven't done." H Ford
May 13, 2003 Thread starter #3 ken2 Mechanical Jan 10, 2003 6 Nope, the dashed box shows up around it when the button is pressed but there is simply no output. Upvote 0 Downvote
May 28, 2003 #4 procadman2 Mechanical May 9, 2003 38 Have you tried looking under Help/Customer Services Info to see if the system still sees you have access to Photorender? I have used it for years but have not had this problem. (On some of our older licenses it is not available.) My next call would be to PTC. procadman2 Proe Design & Admin Mechanical & Aerospace "You can't build a reputation on something you haven't done." H Ford Upvote 0 Downvote
Have you tried looking under Help/Customer Services Info to see if the system still sees you have access to Photorender? I have used it for years but have not had this problem. (On some of our older licenses it is not available.) My next call would be to PTC. procadman2 Proe Design & Admin Mechanical & Aerospace "You can't build a reputation on something you haven't done." H Ford
