Elenh
Civil/Environmental
- Dec 6, 2007
- 5
According to din 4014 the min pile's embedment depth in the bearing stratum is 2.5m.
So my question is: if the bearing stratum has an undrained strength cu=150 kN/m2 should the pile be embedded also 2.5 m or not? Note that the bearing layer extend to a large depth.
So my question is: if the bearing stratum has an undrained strength cu=150 kN/m2 should the pile be embedded also 2.5 m or not? Note that the bearing layer extend to a large depth.
