Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pin-Out GE Series 1 PLC Control?

Status
Not open for further replies.
STEPE

STEPE

Electrical
Joined
Jun 21, 2001
Messages
6
Location
US
Greetings,
Has anyone the Pin-Out for the external, front connector on the CPU card for a GE Series ONE PLC? By this I mean which pin is input, which is +v, which is -v, which is output, etc.



Steve Edwards, P.E./Edwards Technical Consulting/619-262-0936
 
Status
Not open for further replies.

Similar threads

NickParker
  • Question Question
Tie Breaker in Series and Bus duct
Replies
8
Views
16K
bacon4life
bacon4life
RM12
  • Question Question
GE Vertical Motor - Spherical Roller bearing with springs
Replies
2
Views
4K
RM12
RM12
R
  • Locked
  • Question Question
PLC programming Using CX-Programmer
Replies
0
Views
2K
rajubhai26
R
SA07
  • Question Question
To replace obsolete Mark VIe steam turbine control system
Replies
4
Views
2K
SA07
SA07
PegLeg03
  • Locked
  • Question Question
VFD to PLC via CANopen issues
Replies
3
Views
529
Heaviside1925
Heaviside1925

Part and Inventory Search

Sponsor

Back
Top