Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
pipe coating
- Thread starter yazguli
- Start date
LittleInch
Petroleum
looks like someone put this through google translate.
It seems to say grit blast to SA 2.5, then primer coat of 40 micron, followed by top coat of 60 micron, total 100 micron thick.
Possibly with some sort of cut back on the ends or a cap protecting the ends / inside the pipe.
It seems to say grit blast to SA 2.5, then primer coat of 40 micron, followed by top coat of 60 micron, total 100 micron thick.
Possibly with some sort of cut back on the ends or a cap protecting the ends / inside the pipe.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Locked
- Question