I am making a QC testing station that tests the bursting pressure of polyethylene tubing (.5" Dia, ~.1" Wall thickness) I need a pump that will gradually increase the pressure from about 30 psi to 300 psi over a period of time of a minimum of about 1 minute. All I have found so far are electro hydrostatic test pumps. The problem with these is that they will jump from 30 to 250 psi in about half a second.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pipeline Pressure pump 1
- Thread starter JRC1
- Start date
-
1
- #2
MikeHalloran
Mechanical
An Enerpac hand pump will go as slow as you want.
Mike Halloran
Pembroke Pines, FL, USA
Mike Halloran
Pembroke Pines, FL, USA
- Thread starter
- #3
MikeHalloran
Mechanical
Drive the hand pump with a linear actuator, and control THAT electronically.
Mike Halloran
Pembroke Pines, FL, USA
Mike Halloran
Pembroke Pines, FL, USA
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
