Piping network 2

[aombr]

Is there a free Hydraulic piping network software available ?

 

[kmuhsen]

I beleive CRANE valves company do have one

 

[aombr]

Hello Kmuhsen, thanks a lot for your quick answer! I'll try to found more about Crane technical tips on its HP. I know only about Crane famous book about hydraulics accesories and related topics. <br>
There are a lot of demos softwares avaiable, but I need asap some complete (no demo) for free in order to make a simply piping simulation.<br>
<br>
By the way, where are you from? I'm a brazilian mech. engineer. See more on my HP (<A HREF="

http://www.geocities/Eureka/Gold/7933"

TARGET="_new">

http://www.geocities/Eureka/Gold/7933</A>)<br>

<br>
Best regards - keep in contact!

 

[kmuhsen]

Hello there<br>
My name is Khaled Muhsen from Jordan( Middle East)<br>
you can down load a simple software free from the following site : <A HREF="

http://www.RITZ-pumpen.de"

TARGET="_new">

http://www.RITZ-pumpen.de</A><br>

<br>
I trust the above is helpful,<br>
<br>
Byyyy<br>
<br>
Khaled Muhsen<br>
e-mail : <A HREF="mailto:mmsco@go.com.jo">mmsco@go.com.jo</A>

 

[ghillis]

Unfortunately the Crane software is not free and the book, Technical Paper 410 (TP-410) is not free, but if you whine at the local Crane rep you can probably get the book which comes in both US and metric versions. I've used them both, and they are the definitive methods. If you can live with calculator programs there are some good ones available for the HP48.