Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Piping Traceability
- Thread starter EslamSH
- Start date
EdStainless
Materials
If you are working under ASME then you will have materials identified from the melt source through to the finished installation.
As the work is handed off between parties this information is part of what is required.
You simply don't accept responsibility unless the package is complete.
And you don't wait until the final handoff before raising questions.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
As the work is handed off between parties this information is part of what is required.
You simply don't accept responsibility unless the package is complete.
And you don't wait until the final handoff before raising questions.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question