Piping with CAD

[chobes123]

i am looking for program which can be used for Pipe drawings can anyone suggest such a thing?

 

[Standing]

Yes, look into SolidWorks at

http://www.solidworks.com/

http://www.solidworks.com/pages/programs/Routing/Routingoffer.html

I have not used it, but the demo’s I have seen look good.
You may want to put this question on the SolidWorks form.


Bradley

 

[fwc]

Check these links;

http://www.eccadcam.com/

http://www.cadpipe.com/

 

[looslib]

Unigraphics and Pro/E both have piping design modules.

"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[anotherpipeguy]

Rebis AutoPlant (now Bently something or other) is the state-of-the-art program for piping and/or industrial design. Rebis will generate your isometrics from your model, with a B.O.M., and do a host of other things for you that are too lengthy for me to describe here. I am an AutoCAD guy, and have tried Solidworks, Microstation, and scores of others, so I am a bit predjudiced about the entire matter. However, take a look at their offerings at either the Bently site or at Rebis.com