Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

piston

Status
Not open for further replies.
Klappstuhl

Klappstuhl

Mechanical
Dec 12, 2012
1
Hello,

i have to initialize a function or a force, which moves a piston from the right to the left an back. The piston is connected with a return spring.

Demands on the function:

the piston should move for a certain way, stay in this position for some seconds. Then it goes back, because of the return spring.

Thanks for your help!
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Yes that should be possible in ADAMS. Draw the force required out as a function of time, then crete an SFORCE statement to generate that force on the piston.



Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top Bottom