Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Placement tolerance for drilled shaft rebar

Status
Not open for further replies.
rowe

rowe

Structural
Jun 26, 2001
95
According to CRSI, what is the placement tolerance for main reinforcing bars in a drilled shaft? (#10 bar in shaft)

Thank you to anyone who responds.
 
Status
Not open for further replies.

Similar threads

G
  • Question
What standard is used for high-temperature pressure vessels in Europe?
Replies
0
Views
713
GlassPowder
G
Charon99
  • Locked
  • Question
What is the standard for paint defect tolerance?
Replies
2
Views
395
Charon99
Charon99
HungryDinosaur_imported
  • Locked
  • Question
Line colour code/standard for dimensions, text and equipment on .dwg drawings
Replies
3
Views
4K
BrianPetersen
BrianPetersen
ajw771983
  • Locked
  • Question
Seismic design forces for Non-structural components above grade
Replies
0
Views
699
ajw771983
ajw771983
nvcadadmin
  • Locked
  • Question
Single Source Options for Standards Organizations
Replies
0
Views
567
nvcadadmin
nvcadadmin

Part and Inventory Search

Sponsor

Back
Top Bottom