Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Plastic Hinge Assignment in Beam and column

Status
Not open for further replies.
RK Sriwastav

RK Sriwastav

Civil/Environmental
Joined
Oct 17, 2017
Messages
56
Location
IN
How can we get the Parameters like "P and V value from" and "Reinforcing ratio" and "Shear reinforcing ratio".

If there lateral load applied then what load case do we need to apply for the above parameters ?

I have attached the screenshot.

Ravi K
 
 https://files.engineering.com/getfile.aspx?folder=76559544-9220-4fe6-b5b0-892e030ae1de&file=Hingle_Assignment_in_SAP2000.PNG
Status
Not open for further replies.

Similar threads

Nexiz
  • Locked
  • Question Question
NL Pushover Analysis - Fiber Hinge
Replies
1
Views
2K
jmovalle
J
JoeH78
  • Locked
  • Question Question
Hinge For Time History Analysis
Replies
2
Views
1K
JoeH78
JoeH78
g.alshamsi
  • Locked
  • Question Question
Defining Plastic Hinges in built-up cold formed steel sections.
Replies
9
Views
1K
driftLimiter
driftLimiter
N
  • Question Question
SAP 2000 - Center of Mass and Center of Rigidity
Replies
0
Views
5K
Neeka
N
P
  • Locked
  • Question Question
Anker and Masses
Replies
2
Views
2K
PiaKoerz
P

Part and Inventory Search

Sponsor

Back
Top