Plot Date -(for Steve -3dlogix) 1

[Hora]

This post is especially for Steve from 3D Logix, but if someone else is interested...

Few months ago, you were asking about an automatic date/time printing method on the paper. I found this link:

http://www.spekan.com/innotiv/index.php?mnu=dwnl&sub=pldate

Spekan has an utility that maybe you can help you. Take a look at it.

-Hora

 

[3dlogix]

Hora, thanks for thinking of me!

I actaully tried (or almost did) their plot date utility, but found it cumbersome with all the local temp settings, since we had different users on different machines.

Since then, I use ProE's print time and adjust the x,y offset of the plot. Works great actually.

If you have tried it, let me now how it turns out.

Thanks.

http://www.sprdesign.com

 

[Hora]

Hi Steve,

I'm not using Spekan Plot Date program, but here in my department there are some people interested in.

I will check on my side, too. I was thinking of creating a small program using Pro/Toolkit routines that can do what you need. I'll keep you in touch. I see we are in the same area code (514)

Regards,
-Hora

 

[3dlogix]

Yup, outta Mtl, West Island more specific.

http://www.sprdesign.com