Plot queue setting for Konica/Minolta 1

[gergs]

Hey guys,

Im plotting to a Konica/Minolta C350 printer. Using the queue below I can get 8.5x11 plots but I cant seem to get it to switch to the 11x17 tray for larger plots. Any suggestions on how to tweak the settings to get 11x17 output??? BTW this machine doesnt seem to like postscript.

Thanks,
Gergs

BIZ1_PJ
Despooler Name = UGIIHP
Plotter Vendor = HEWLETT-PACKARD
Plotter Type = Electrostatic
Number Of Pens = 8
Controller ID =
Plotter Model = 7600
Plotter Switches = /2/PJ/SP=CN/AR/PS
Media Control = Continuous Form
Distance Between Plots = 0
Output Mode = Queue
Plotter Com Line =
System Queue Name = \\FTTWINSRV02\BIZHUB1
Directory Pathname =
Tape Density = 1600
Message Interval =
Message Com Line =
Horizontal Maximum = 0
Vertical Maximum = 0
Steps Per Inch = 1016
Optimization Level = None

 

[looslib]

You need to create a second plot queue that specifies the proper paper size. On the plotter switches line, add a /17.

UG, prior to NX3, doesn't support multiple paper sizes in a single plot queue. Since NX3 uses different plotting software, I don't know what it does.


"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand