Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Plotting from NX4

Status
Not open for further replies.
GPowers2

GPowers2

Aerospace
Joined
May 8, 2003
Messages
98
Location
GB
people,

I am using NX4.0.3.3 MP3.

I could do with some help in setting up a plotter, or printer that would allow me to produce a hard copy where the drawing is tradional black on white and that a particular layer, or color from NX be produced in RED .... setting up a plotter looks a bit clunky so if anyone has some concise instructions that would be appreciated

thanks in advance for anything you have ..

regards .... gary
 
Status
Not open for further replies.

Similar threads

CAD2015
  • Question Question
Plotting management......
Replies
6
Views
6K
Toost
Toost
CAD2015
  • Question Question
NX 2212 - Sheets from curves..............
2
Replies
21
Views
8K
cowski
cowski
CAD2015
  • Question Question
Convert components from an assembly into one single part.......
Replies
5
Views
4K
CAD2015
CAD2015
S
  • Question Question
Reverse Engineering Surface Modeling from STL in Siemens NX
Replies
0
Views
3K
Sennja
S
nyang
  • Question Question
Moving body from part back to assembly level part
Replies
3
Views
12K
Toost
Toost

Part and Inventory Search

Sponsor

Back
Top