Plotting problem

[trinkit]

I sure hope someone can help me here. I am drawing a polyline with a width of 12" to indicate an area of responsibility on several drawings. Most of the drawings are plotting properly, but 2 of them won't: the polyline is plotting not filled in (empty), if that makes any sense. (It appears as if it is a row of boxes.) This is a very important project and I hope one of the fine people here can answer SOON!

I have already checked, and all the plotting settings and display settings are the exact same as the drawings that ARE plotting correctly.

Thank you SO much!

Kat

 

[TCARPENTER1]

Hi Kat,

Make sure Fill is set to 1 or ON -
Check to be sure your VIEWDIR=0'-0",0'-0",0'-1"

Just in case make sure your viewport isn't set to remove hidden lines MVIEW, Hideplot, Off if your working in paperspace.

HTH
Todd

 

[trinkit]

Thank you so much for your help. It worked like a charm!