Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PLS CADD Phase - Phase Clearance Question

Status
Not open for further replies.

edevans

Electrical
Apr 11, 2011
5
I set up the criteria under CRITERIA -> PHASE CLEARANCES...

Now the problem is I'm not sure where to get a report specifically on the phase clearances that I set up under my criteria.

Thanks,

-Ethan
 
Replies continue below

Recommended for you

I mainly use the Tower and PLS-POLE programs to analyze the structures but know a little about the line design in PLS-CADD. First, I would say to read the manual and get an idea of where the function is located. Second, I would call their help line and talk to the experts.

I did fire up the software and loaded a demo line and the menu I think you want is SECTIONS => CLEARANCES => Between Sections... which will bring up a dialog box where you can select the from section and the to section and the weather cases to consider.

HTH

_____________________________________
I have been called "A storehouse of worthless information" many times.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor