PMI section view and PMI assembly filter

[PSI-CAD]

Hi,
The following process work well:
1 create a pmi section view in modeling
2 create a pmi assembly filter
3 Apply the filter to the pmi section view
4 Add this view on the drawing
==) component and PMIs are correct.

Now, il would like to add the following step before step 1
- hide component in view
==) result is ok in modeling
==) bad result in drafting (no component in view)
And hide component in view in drawing doesn't work

Any idea ?

TIA



Regards
Didier Psaltopoulos

http://www.psi-cad.fr