Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pneumatic Purge of a Diesel fuel line?

Status
Not open for further replies.

brainman

Mechanical
Nov 21, 2002
1
Are there any design guidelines for the pneumatic purging of a diesel fuel line (1 1/2)from an undeground unloading station to an underground fuel bay? Would the air and diesel vapors create an explosive fuel gas mixture?
 
Replies continue below

Recommended for you

Purging of lines filled with hydrocarbons should always be done with an inert gas such as Nitrogen.
Portable bottles or quads can be arranged if its only an occasional requirement. Based on your line size you can get a lot done by this method.
Watch your pressure regulation, and have appropriate containment to avoid spills.
Rgds,
RKK
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor