points 2d 1

[james78]

I have bee sent a fax (soon to have the data on a excel) the points are for a 2d curve, what’s the most effective way of generating a 2d curve from these points, To then revolve to get a model?

Thanks

 

[CADGemini]

What you need to do is first convert the excel data to a .txt file. Then use "Insert- Curve Through Free Points"

You will then have to browse to the .txt file and open it.

You should now see your curve generated on your screen. If you want to revolve that curve you may have to create a seperate sketch and convert the curve entities and then draw a centerline to revolve about.

Hope this helps!

Best Regards,
Jon

Challenges are what makes life interesting; overcoming them is what makes life meaningful.

 

[james78]

Thanks for your help.

Thanks again James