Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

pond outlet control

Status
Not open for further replies.

Wood2coal

Civil/Environmental
Sep 19, 2001
7
0
0
US
Anyone know any good outlet control systems (besides pumps)for detention ponds. I'm designing a storm sewer and I have a developer next door that wants to dump an 85 cfs into the trunkline.
 
Replies continue below

Recommended for you

Sure. Make sure his discharge is small enough to limit the additional flow to the value you desire or can reasonably accommodate. He'll holler - after all, the larger his discharge the smaller his pond! Just be sure that you can defend your design -

[pacman]

Please see FAQ731-376 for great suggestions on how to make the best use of Eng-Tips Fora.
 
orifice plate on the outlet pipe is a good way. size it so that the maximum 85 cfs is achieved with headwater at the top of the pond.
 
Status
Not open for further replies.
Back
Top