Pore Fluid Contact Properties

[Leviathan2010]

Dear all,

i am modelling two opposing cartilage layer, in contact,
under compression. The Material is defined using Abaqus-
Materials (1) permeability with (2) hyperelastic solid
grains/matrix and C3D20PR Elements.

There is an hint in section (33.4.1) on pore fluid contact
but it does not work in my case. Is it working in Abaqus
Standard, Soils Transient-Consolidation analysis?

BTW: C3D20PR and permability is only supported in Abaqus/
Standard - Soil (Step)?

Thanks a lot in advance
Felix