Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in

PORV Sensing Lines

Status
Not open for further replies.
kuqaili

kuqaili

Mechanical
Jan 21, 2015
1
0
0
US
I am about to install two PORVs on our Alberta, Canada ammonia plant steam drum. 2 Qs:
1. Where should I locate the sensing line?
2. I am planning to steam trace the sensing line with 50 lb steam. Any limit for steam temp?
 
Status
Not open for further replies.

Similar threads

avgguyfrom85
  • Locked
  • Question
2" sensing line placement
Replies
2
Views
3
avgguyfrom85
avgguyfrom85
gelsi
  • Locked
  • Question
psv inlet and discharge lines sizing 1
Replies
5
Views
6
VAL82
VAL82
Alabaman
  • Locked
  • Question
Freezing of pilot sensing lines
Replies
4
Views
5
zdas04
zdas04
SNORGY
  • Locked
  • Question
Several manifolded inlet lines to one common thermal PSV
Replies
2
Views
3
SNORGY
SNORGY
hageye
  • Locked
  • Question
PORV during and after steaming operation 1
Replies
3
Views
4
greenche
greenche
Back
Top