PR2F Test sequence

[SiggiN]

Hi all!

Is there a requirement for test sequence when qualifying for API6A PR2F OEC? i.e. do we have to test in the same sequence as the chapters in API6A

Specifically, we would prefer to test the Temp./pressure cycling (F.1.11)last for practical reasons.

Regards
Siggi

 

[jmec87]

There does not appear to be any requirement in API 6A to perform the tests in F.2.18 / Table F.20 in any specific order.

However, note that F.1.3 requires hydrostatic testing to PSL 1 prior to all the testing required by F.2.18.