Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
PRE ENGINEERD BUILDINGS Tonnage Cost $ .
- Thread starter malikasal
- Start date
JedClampett
Structural
Their costs are very similar to any other fabricated steel. Their economy is:
[ol 1]
[li]Having a one stop shop (engineering, architecture and detailing).[/li]
[li]Optimizing the design. Much of their design effort is to use light sections such as plate fabricated tapered columns and beams; cold formed Z purlins, etc. [/li]
[/ol]
[ol 1]
[li]Having a one stop shop (engineering, architecture and detailing).[/li]
[li]Optimizing the design. Much of their design effort is to use light sections such as plate fabricated tapered columns and beams; cold formed Z purlins, etc. [/li]
[/ol]
- Status
Similar threads
- Locked
- Question
