Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRECAST CONCRETE PILE

Status
Not open for further replies.

altecdesigns

Civil/Environmental
Feb 2, 2002
18
WHAT IS A GOOD SLUMP REQUIREMENT FOR PRECAST CONCRETE PILE?
WHAT IS A GOO SIDE CLEARANCE FOR POURING?
IS ROTATION OK FOR AURGER PILES NOT GOOD DURING PUMPING?
 
Replies continue below

Recommended for you

Slump:
Depends on required strength and the batch mix (w/ or w/o admixtures)

Concrete Cover (manufactured under plant control conditions):
Exposed to Earth => #6 bar (.75" diam.) to #11 bar (1.41" diam.) requires 1.5" cover
#5 bar (.625" diam) and smaller requires 1.25" cover

Auger Piles: not clear as to what you are asking.
 
it is mix with 4000 psi w/ admixtures
cover 2 1/2" w/ #6 bars 50 ton Capacity
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor