Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Precharge Pressure in Pulsation Damper

Status
Not open for further replies.

ukd

Chemical
Jun 15, 2006
20
NO
Could anybody tell me how to calculate precharge pressure in pulsation damper,gas used : Nitrogen,Pulsation damper : bladder type,6 liters

System Specs:

Pump Strokes/min of each piston: 960
Displacement of volume in each stroke:
6,25 mm3 * (6 * 960) strokes = 36 litre/minute
(max flow @ approx 35 Bar)

Max flow @ 345 Bar: 25,5 litre/min. MWP: 345 Bar

Oceanic: HW 443 & HW 540 (Water/glycol)
Material : 316SS

Operation range for the pump is from 50 bar to 345 bar.
6 Piston Pump.

Thanks
 
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top