Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

prequalified WPS

Status
Not open for further replies.

ali119

Materials
Jan 18, 2013
12
Hi
There are some ambiguity about below sentence:
Welding procedures shall be prepared and tested in accordance with AWS D1.1. Use of pre-qualified procedures will be acceptable,provided that certified test results showing conformance to specification requirements are submitted to and approved by COMPANY.
I have a quastion:
Is the meaning of prequalified WPS that we not shall provid PQR? if answer is No what is the meaning of prequalified?

Best regard

 
Replies continue below

Recommended for you

Pre-qualification of weld procedures is described in AWS D1.1. I would recommend you obtain clarification of the above statement from the client on their expectation of using AWS D1.1 pre-qualified welding procedures. This is the best approach to address any ambiguity.
 
Please note that I often see prequalified WPS's and SWPS's per B2.1 often intermixed in contract language. It's conceivable that the company is permitting the use of an SWPS if you've provided a demonstration record.

Metengr is correct here though, only the author of the spec can clarify the meaning of that statement.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor