We are having problems with our ductile iron line/ HDPE line holding pressure.
The contractor says its an air lock problem, and we said its a water leaking somewhere.
We pressurized the waterline up to 125psi and 70 minutes later it dropped to 95psi.
Is there a way to know if this is a water leak or if it is an air lock issue.
Please advise.
Thanks
The contractor says its an air lock problem, and we said its a water leaking somewhere.
We pressurized the waterline up to 125psi and 70 minutes later it dropped to 95psi.
Is there a way to know if this is a water leak or if it is an air lock issue.
Please advise.
Thanks